istio.networking.v1alpha3

接口 SidecarOuterClass.IstioEgressListenerOrBuilder

所有超级接口:

com.google.protobuf.MessageLiteOrBuilder, com.google.protobuf.MessageOrBuilder

所有已知实现类:

SidecarOuterClass.IstioEgressListener, SidecarOuterClass.IstioEgressListener.Builder

封闭类:

SidecarOuterClass

public static interface SidecarOuterClass.IstioEgressListenerOrBuilder
extends com.google.protobuf.MessageOrBuilder

方法概要

限定符和类型	方法和说明
String	getBind() The IP or the Unix domain socket to which the listener should be bound to.
com.google.protobuf.ByteString	getBindBytes() The IP or the Unix domain socket to which the listener should be bound to.
SidecarOuterClass.CaptureMode	getCaptureMode() When the bind address is an IP, the captureMode option dictates how traffic to the listener is expected to be captured (or not).
int	getCaptureModeValue() When the bind address is an IP, the captureMode option dictates how traffic to the listener is expected to be captured (or not).
String	getHosts(int index) One or more service hosts exposed by the listener in `namespace/dnsName` format.
com.google.protobuf.ByteString	getHostsBytes(int index) One or more service hosts exposed by the listener in `namespace/dnsName` format.
int	getHostsCount() One or more service hosts exposed by the listener in `namespace/dnsName` format.
List<String>	getHostsList() One or more service hosts exposed by the listener in `namespace/dnsName` format.
GatewayOuterClass.Port	getPort() The port associated with the listener.
GatewayOuterClass.PortOrBuilder	getPortOrBuilder() The port associated with the listener.
boolean	hasPort() The port associated with the listener.

从接口继承的方法 com.google.protobuf.MessageOrBuilder

findInitializationErrors, getAllFields, getDefaultInstanceForType, getDescriptorForType, getField, getInitializationErrorString, getOneofFieldDescriptor, getRepeatedField, getRepeatedFieldCount, getUnknownFields, hasField, hasOneof

从接口继承的方法 com.google.protobuf.MessageLiteOrBuilder

isInitialized

方法详细资料

hasPort

boolean hasPort()

 The port associated with the listener. If using Unix domain socket,
 use 0 as the port number, with a valid protocol. The port if
 specified, will be used as the default destination port associated
 with the imported hosts. If the port is omitted, Istio will infer the
 listener ports based on the imported hosts. Note that when multiple
 egress listeners are specified, where one or more listeners have
 specific ports while others have no port, the hosts exposed on a
 listener port will be based on the listener with the most specific
 port.
 

.istio.networking.v1alpha3.Port port = 1;

返回:

Whether the port field is set.

getPort

GatewayOuterClass.Port getPort()

 The port associated with the listener. If using Unix domain socket,
 use 0 as the port number, with a valid protocol. The port if
 specified, will be used as the default destination port associated
 with the imported hosts. If the port is omitted, Istio will infer the
 listener ports based on the imported hosts. Note that when multiple
 egress listeners are specified, where one or more listeners have
 specific ports while others have no port, the hosts exposed on a
 listener port will be based on the listener with the most specific
 port.
 

.istio.networking.v1alpha3.Port port = 1;

返回:

The port.

getPortOrBuilder

GatewayOuterClass.PortOrBuilder getPortOrBuilder()

 The port associated with the listener. If using Unix domain socket,
 use 0 as the port number, with a valid protocol. The port if
 specified, will be used as the default destination port associated
 with the imported hosts. If the port is omitted, Istio will infer the
 listener ports based on the imported hosts. Note that when multiple
 egress listeners are specified, where one or more listeners have
 specific ports while others have no port, the hosts exposed on a
 listener port will be based on the listener with the most specific
 port.
 

.istio.networking.v1alpha3.Port port = 1;

getBind

String getBind()

 The IP or the Unix domain socket to which the listener should be bound
 to. Port MUST be specified if bind is not empty. Format: `x.x.x.x` or
 `unix:///path/to/uds` or `unix://@foobar` (Linux abstract namespace). If
 omitted, Istio will automatically configure the defaults based on imported
 services, the workload instances to which this configuration is applied to and
 the captureMode. If captureMode is `NONE`, bind will default to
 127.0.0.1.
 

string bind = 2;

返回:

The bind.

getBindBytes

com.google.protobuf.ByteString getBindBytes()

 The IP or the Unix domain socket to which the listener should be bound
 to. Port MUST be specified if bind is not empty. Format: `x.x.x.x` or
 `unix:///path/to/uds` or `unix://@foobar` (Linux abstract namespace). If
 omitted, Istio will automatically configure the defaults based on imported
 services, the workload instances to which this configuration is applied to and
 the captureMode. If captureMode is `NONE`, bind will default to
 127.0.0.1.
 

string bind = 2;

返回:

The bytes for bind.

getCaptureModeValue

int getCaptureModeValue()

 When the bind address is an IP, the captureMode option dictates
 how traffic to the listener is expected to be captured (or not).
 captureMode must be DEFAULT or `NONE` for Unix domain socket binds.
 

.istio.networking.v1alpha3.CaptureMode capture_mode = 3;

返回:

The enum numeric value on the wire for captureMode.

getCaptureMode

SidecarOuterClass.CaptureMode getCaptureMode()

 When the bind address is an IP, the captureMode option dictates
 how traffic to the listener is expected to be captured (or not).
 captureMode must be DEFAULT or `NONE` for Unix domain socket binds.
 

.istio.networking.v1alpha3.CaptureMode capture_mode = 3;

返回:

The captureMode.

getHostsList

List<String> getHostsList()

 One or more service hosts exposed by the listener
 in `namespace/dnsName` format. Services in the specified namespace
 matching `dnsName` will be exposed.
 The corresponding service can be a service in the service registry
 (e.g., a Kubernetes or cloud foundry service) or a service specified
 using a `ServiceEntry` or `VirtualService` configuration. Any
 associated `DestinationRule` in the same namespace will also be used.
 The `dnsName` should be specified using FQDN format, optionally including
 a wildcard character in the left-most component (e.g., `prod/*.example.com`).
 Set the `dnsName` to `*` to select all services from the specified namespace
 (e.g., `prod/*`).
 The `namespace` can be set to `*`, `.`, or `~`, representing any, the current,
 or no namespace, respectively. For example, `*/foo.example.com` selects the
 service from any available namespace while `./foo.example.com` only selects
 the service from the namespace of the sidecar. If a host is set to `*/*`,
 Istio will configure the sidecar to be able to reach every service in the
 mesh that is exported to the sidecar's namespace. The value `~/*` can be used
 to completely trim the configuration for sidecars that simply receive traffic
 and respond, but make no outbound connections of their own.
 NOTE: Only services and configuration artifacts exported to the sidecar's
 namespace (e.g., `exportTo` value of `*`) can be referenced.
 Private configurations (e.g., `exportTo` set to `.`) will
 not be available. Refer to the `exportTo` setting in `VirtualService`,
 `DestinationRule`, and `ServiceEntry` configurations for details.
 **WARNING:** The list of egress hosts in a `Sidecar` must also include
 the Mixer control plane services if they are enabled. Envoy will not
 be able to reach them otherwise. For example, add host
 `istio-system/istio-telemetry.istio-system.svc.cluster.local` if telemetry
 is enabled, `istio-system/istio-policy.istio-system.svc.cluster.local` if
 policy is enabled, or add `istio-system/*` to allow all services in the
 `istio-system` namespace. This requirement is temporary and will be removed
 in a future Istio release.
 

repeated string hosts = 4 [(.google.api.field_behavior) = REQUIRED];

返回:

A list containing the hosts.

getHostsCount

int getHostsCount()

 One or more service hosts exposed by the listener
 in `namespace/dnsName` format. Services in the specified namespace
 matching `dnsName` will be exposed.
 The corresponding service can be a service in the service registry
 (e.g., a Kubernetes or cloud foundry service) or a service specified
 using a `ServiceEntry` or `VirtualService` configuration. Any
 associated `DestinationRule` in the same namespace will also be used.
 The `dnsName` should be specified using FQDN format, optionally including
 a wildcard character in the left-most component (e.g., `prod/*.example.com`).
 Set the `dnsName` to `*` to select all services from the specified namespace
 (e.g., `prod/*`).
 The `namespace` can be set to `*`, `.`, or `~`, representing any, the current,
 or no namespace, respectively. For example, `*/foo.example.com` selects the
 service from any available namespace while `./foo.example.com` only selects
 the service from the namespace of the sidecar. If a host is set to `*/*`,
 Istio will configure the sidecar to be able to reach every service in the
 mesh that is exported to the sidecar's namespace. The value `~/*` can be used
 to completely trim the configuration for sidecars that simply receive traffic
 and respond, but make no outbound connections of their own.
 NOTE: Only services and configuration artifacts exported to the sidecar's
 namespace (e.g., `exportTo` value of `*`) can be referenced.
 Private configurations (e.g., `exportTo` set to `.`) will
 not be available. Refer to the `exportTo` setting in `VirtualService`,
 `DestinationRule`, and `ServiceEntry` configurations for details.
 **WARNING:** The list of egress hosts in a `Sidecar` must also include
 the Mixer control plane services if they are enabled. Envoy will not
 be able to reach them otherwise. For example, add host
 `istio-system/istio-telemetry.istio-system.svc.cluster.local` if telemetry
 is enabled, `istio-system/istio-policy.istio-system.svc.cluster.local` if
 policy is enabled, or add `istio-system/*` to allow all services in the
 `istio-system` namespace. This requirement is temporary and will be removed
 in a future Istio release.
 

repeated string hosts = 4 [(.google.api.field_behavior) = REQUIRED];

返回:

The count of hosts.

getHosts

String getHosts(int index)

 One or more service hosts exposed by the listener
 in `namespace/dnsName` format. Services in the specified namespace
 matching `dnsName` will be exposed.
 The corresponding service can be a service in the service registry
 (e.g., a Kubernetes or cloud foundry service) or a service specified
 using a `ServiceEntry` or `VirtualService` configuration. Any
 associated `DestinationRule` in the same namespace will also be used.
 The `dnsName` should be specified using FQDN format, optionally including
 a wildcard character in the left-most component (e.g., `prod/*.example.com`).
 Set the `dnsName` to `*` to select all services from the specified namespace
 (e.g., `prod/*`).
 The `namespace` can be set to `*`, `.`, or `~`, representing any, the current,
 or no namespace, respectively. For example, `*/foo.example.com` selects the
 service from any available namespace while `./foo.example.com` only selects
 the service from the namespace of the sidecar. If a host is set to `*/*`,
 Istio will configure the sidecar to be able to reach every service in the
 mesh that is exported to the sidecar's namespace. The value `~/*` can be used
 to completely trim the configuration for sidecars that simply receive traffic
 and respond, but make no outbound connections of their own.
 NOTE: Only services and configuration artifacts exported to the sidecar's
 namespace (e.g., `exportTo` value of `*`) can be referenced.
 Private configurations (e.g., `exportTo` set to `.`) will
 not be available. Refer to the `exportTo` setting in `VirtualService`,
 `DestinationRule`, and `ServiceEntry` configurations for details.
 **WARNING:** The list of egress hosts in a `Sidecar` must also include
 the Mixer control plane services if they are enabled. Envoy will not
 be able to reach them otherwise. For example, add host
 `istio-system/istio-telemetry.istio-system.svc.cluster.local` if telemetry
 is enabled, `istio-system/istio-policy.istio-system.svc.cluster.local` if
 policy is enabled, or add `istio-system/*` to allow all services in the
 `istio-system` namespace. This requirement is temporary and will be removed
 in a future Istio release.
 

repeated string hosts = 4 [(.google.api.field_behavior) = REQUIRED];

参数:

index - The index of the element to return.

返回:

The hosts at the given index.

getHostsBytes

com.google.protobuf.ByteString getHostsBytes(int index)

 One or more service hosts exposed by the listener
 in `namespace/dnsName` format. Services in the specified namespace
 matching `dnsName` will be exposed.
 The corresponding service can be a service in the service registry
 (e.g., a Kubernetes or cloud foundry service) or a service specified
 using a `ServiceEntry` or `VirtualService` configuration. Any
 associated `DestinationRule` in the same namespace will also be used.
 The `dnsName` should be specified using FQDN format, optionally including
 a wildcard character in the left-most component (e.g., `prod/*.example.com`).
 Set the `dnsName` to `*` to select all services from the specified namespace
 (e.g., `prod/*`).
 The `namespace` can be set to `*`, `.`, or `~`, representing any, the current,
 or no namespace, respectively. For example, `*/foo.example.com` selects the
 service from any available namespace while `./foo.example.com` only selects
 the service from the namespace of the sidecar. If a host is set to `*/*`,
 Istio will configure the sidecar to be able to reach every service in the
 mesh that is exported to the sidecar's namespace. The value `~/*` can be used
 to completely trim the configuration for sidecars that simply receive traffic
 and respond, but make no outbound connections of their own.
 NOTE: Only services and configuration artifacts exported to the sidecar's
 namespace (e.g., `exportTo` value of `*`) can be referenced.
 Private configurations (e.g., `exportTo` set to `.`) will
 not be available. Refer to the `exportTo` setting in `VirtualService`,
 `DestinationRule`, and `ServiceEntry` configurations for details.
 **WARNING:** The list of egress hosts in a `Sidecar` must also include
 the Mixer control plane services if they are enabled. Envoy will not
 be able to reach them otherwise. For example, add host
 `istio-system/istio-telemetry.istio-system.svc.cluster.local` if telemetry
 is enabled, `istio-system/istio-policy.istio-system.svc.cluster.local` if
 policy is enabled, or add `istio-system/*` to allow all services in the
 `istio-system` namespace. This requirement is temporary and will be removed
 in a future Istio release.
 

repeated string hosts = 4 [(.google.api.field_behavior) = REQUIRED];

参数:

index - The index of the value to return.

返回:

The bytes of the hosts at the given index.